HOME > PRODUCTION > MULTI TYPE WIPING CLEANER

WIPING CLEANER

MULTI TYPE WIPING CLEANER

マルチタイプPCB端子クリーナーII
  • 1.Standalone Type
    2.Wipe out dust on .Electrode zone(terminal zone) of PCB with wiping cloth.
    3.Stable cleaning assures the quality.
    4.Wipe out too much dust such as attached dust, flux during transportation of the Machine.
    5.High-performance type cleaner with pressure adjustment function during wiping process.

FEATURE

1 Standalone Type
   
2 Wipe out dust on .Electrode zone(terminal zone) of PCB with wiping cloth.
   
3 Stable cleaning assures the quality.
   
4 Wipe out too much dust such as attached dust, flux during transportation of the Machine.
   
5 High-performance type cleaner with pressure adjustment function during wiping process.

BASIC SPECIFICATIONS

1) Work
(1)Work Size Max 100mm × 100mm
(2)Cleaning portion Max.10 places
2) Mechanical Section
(1)Wiping Tape Savina Minimax(Kanebo Synthetic)
(2)Width of Tape 10 - 20mm
(3)Length of Tape 47m
3) Mechanical Section
(1)Positioning for Work Pin and Outer Shape Guide
(2)Moving Stage Drive by Stepping Motor
X axis: 100mm
Y axis: 150mm
(3)Head Up and Down Air Cylinder
Impositive Structure: Adjust Impositive Pressure by Change Spring Compression.
Impositive Pressure: 0-1kg
Impositive Pressure Measurement by Pressure Sensor
* Fixture Type Measured from outside
Head: SUS Material, It is exchangeable to Multiple Type
※No floating structure
(4)Tape Feeding DC Gear Motor Tape Feeding Amount: Set and Display Feeding Amount.
Take-up Amount: In order to Use Both Side of Tape, Have it Backwards When Take-up Tape.
(5)Cleaning Fluid Dispenser
Folling Drop Method: Fall in drops to the Center of Wiping Tape.
Dropping Amount Control Range : Below 10-100μ
Cleaning Fluid : Max.1L
(Detachable Tank with Cover)
(6)Mechanical Section Cover Clean Spec. is Clean Grade Class 100 (0.3μm)
Mechanism: Put ULPA on the upper side, Exhaust from Bottom side.
Safety Measurement: Work Desorption Window in front of Machine.
*No need Area Sensor
(7)Countermeasure against Static Put up Ground from the Parts Except Insulator Parts.
Resistance:Below 2Ω
(8)Trestle Trestle for Standing Work
Mechanism: Trestle with Wheels, Store Controller Associated Unit inside
Height to Surface of Fixture: 900mm
4) Control
(1)Operation Panel Operation can be done such as Start, ORG, Dispense, EMG Stop etc.
(2)Control Unit Function Choose Power ON/OFF, Manual Operation, Cleaning Program etc.
(3)Controller Programmable Controller
4)Number of Program 3-4 Programs Register (64 steps)
*Create Minimum Pitch Position Data, It also can be Selected from Moving Pitch.
5) Utility
(1)Power Consumption AC100V 50Hz/60Hz
(2)Outer Dimension 0.5MPa

To page top