HOME > PRODUCTION > Others > CONTINUOUS WIRE CUTTER

CONTINUOUS WIRE CUTTER

CONTINUOUS WIRE CUTTER

さまざまな金属細線を超高速・高精度切断
There are various steps for cutting linear PCB. SAYAKA uses the most orthodox" Tunnel Type" and the machine cuts max. 15 pieces at the same time and 20 times per second in combination of unique transmission line, and cutter driving steps. This also can do sizing cutting 400 pieces per second and realizes high accuracy, high productivity and high reliability. As this is rather for general use, it can be done to cutout minute metal, plastic materials and to apply for production of plastic spacer and plastic washer and others. If you have any difficulty with cutting linear PCB, please contact SAYAKA.

FEATURE

1 Sizing cutting for linear materials can be done to max.400 pieces per second.
   
2 Highly accurate cutting can be done with cutter driving step.
   
3 Change for production quantity and cutting length can just be done by direct figure input from Touch Panel.
   
4 Quite compact (Installation area of Machine; approx. 500mm×500mm)

UNIQUE TRANSMISSION LINE

This is composed of wide Feeding Roller and Belt and linear PCB with about φ0.1 - 0.5 (max. 20) can be fed at the same time. Geared Stepping Motor is used for driving and accurate feedi ng can be done by canceling backlash and hysteresis of Geared Motor.

UNIQUE CUTTER DRIVING

This is composed of Solenoid and Spring and high speed cutting can be done. The cutter is driven with high speed./high thrust/long life/safety in the original Solenoid circuit.

BASIC SPECIFICATIONS

Outer Dimension (Main body Dimension) W500mm×D500mm×H1315mm
(Operation Box) W430mm×D400mm×H200mm
Machine Weight Approx. 150kg
Power AC100V
Material for Cutting Metal wires such as Solder wire, Copper wire, Stainless wire
PCB φ0.1 - φ0.5
Cutting Process Cutting by Linear blade and Comb Blade Die
Cutting Length 0.1mm-- 3mm
Cutting Speed once/sec. - 20 times/sec.
Cutting Accuracy Below 0.1mm - 1.0mm : ±5%
Below 1.0mm - 3.0mm : ±50μm
Supply of PCB Reel ( Max. 15 Reels )
PCB Feeding Stepping Motor and Rubber Belt
Control Programmable Controller
Operation Panel Touch Panel Type

To page top