HOME > PRODUCTION > Dry Dicer > SAM-CT1520D

SAM-CT1520D

SAM-CT1520D
 


It suitable to cut compact size high density PCB such as VCO, TCXO, BGA, CSP, MCM, Camera module, Card PCB, Sensor PCB etc.

FEATURE

1 Use blade with high speed rotation to cut PCB safely in low stress, smooth finish for PCB cross section.
 
2 Collaboration with powerful dust collector, thus only little amount of dust attach on PCB.
   
3 Water supply and drainage equipment is not needed without using water, which will lead to no harm to the environment and realizing the reduction of running cost.
   
4 As PCB is fixed on Jig with vacuum adsorption, UV tape, etc are not needed and the cost can be reduced.
  Fix PCB by vacuum forms
5 Various blades can be selected. (GC, Diamond, Metal Saw)
   
6 Able to cut in High precision because of 4 axes control.
   

7

Image processing function(CCD Camera) is installed, makes it possible to cut PCB with more high precision.
 
8 Safety cutting supported by detection of blade chippage and wear. Also eliminate static by electricity removal blow.
   
9 Each operation is done by PC and any error is shown on Monitor Guidance, when some trouble occurred .
   

To page top

BASIC SPECIFICATIONS

PCB Size(Max.) 200mm×150mm
PCB Thickness(Max.) 2mm
X Axis Moving Range 370mm
Moving Speed 500mm/sec
resolution 0.001mm
Repeat Accuracy ±0.01mm
Y Axis Moving Range 350mm
Moving Speed 500mm/sec
Cutting Speed 1-200mm/sec
Resolution 0.001mm
Repeat Accuracy ±0.01mm
Z Axis Moving Range 27mm
Moving Speed 1-50mm/sec
Resolution 0.001mm
Repeat Accuracy ±0.01mm
Q Axis Rotation Angle +95°, -5°
Repeat Accuracy ±3"
R Axis Output 90W
Rotation(Max.) 13,000 rpm
Blade Outer Diameter×ID φ75×40mm
Thickness 0.1-0.5mm
Utility Power Voltage φ3 AC200V 50/60Hz
Power Consumption(Max.) 4KVA
Air Pressure 0.5-0.7Mpa
Air Consumption 300L/min (A.N.R)
Ionizer High Frequency Fan
Outer Dimension W×D×H (mm) W800×D1210×H1300mm(Except Monitor)
Weight of Main Unit Approx.700kg
Dust Collector Power Consumption 0.75KW

To page top