Production Info : Router Depanelling Machine


Loader & Un-loader are equipped Full auto IN-LINE downside cutting router SAM-CT22ZR IN-LINE
It is recommended to cut the following PCB
  Suitable for such PCB as can not be cut from the above side of component PCB such as camera module with small collective PCB.


1 Cutting with Jig circulation system is done and this is suitable for PCB with a plenty of pieces.
2 Complete automation process from Magazine to supply, cutting and storing in tray of PCB.
3 Cutting dusts are reduced as much as possible by brush and ionizer unit in each part.
4 Nozzle suction and brush suction are adopted at cutting unit and the function to reduce cutting dust is adopted.
5 Cutting can be done without stress on PCB by using Spindle with high performance.
6 Switch of product model can easily be done by operation of Touch Panel and replacement of Jig.
7 Automatic select cutting program with JIG BIT system.

To page top


PCB Size(Max.) 60×200mm
Angle 0.4-2.0mm
Material(Resin) FR4, CEM1, CEM3 etc.
JIG Carrier Unit P&P X Driving AC Servo
P&P Z Driving Twin Head Cylinder
JIG Positioning Positioning Pin Type
JIG Clamp Chuck Cylinder
Cutting Unit Operation Panel Touch Panel
Cutting Speed 50mm/sec
Repeatability ±0.01mm
Movement Speed(Max.) 600mm/sec
X.Y.Z Driving Servo
PRG Data Creation Direct, Coordinate Input Teaching (PRG Edit Software)
Spindle Unit Collet Dia. φ3.175mm
Router Bit Dia. φ0.8, φ1.0, φ1.2, φ1.5, φ2.0mm
Router Bit Replacement Air Chuck
Driving High Frequency Induction Motor
Rotation 5,000-50,000rpm
Loading Unit PCB Magazine Rack Dimension L200×W67×H140mm
PCB Magazine Rack Store No. 8 pcs
PCB Stock No. 20 sheets/Magazine
Feeding Conveyer &Retracting Cylinder (PCB Clamp)
Unloading Unit Operation Panel Operation Panel
Movement Speed(Max.) 1,000mm/sec
X,Y Axes Control PLC
Z Axis Twin Head Cylinder
Q axis 270°Motor Driving
Repeatability ±0.01mm
Tray Stock Sheet No. 30 pcs
PCB Magazine Rack Dimension 135.8×315.8×11.7mm
Utility Power φ3 AC200V 50/60Hz
Air Pressure 0.5MPa
Power Consumption 5.0KVA (Inc.Dust Collector)
Dimension L2700×D1250×H1400mm
Weight Approx.1500kg
Dust Collector 1.5KVA

To page top