HOME > PRODUCTION > Router Machine > SAM-CT22ZR Standalone

Production Info : Router Machine Standalone

SAM-CT22ZR Standalone

Able to cut tall packaging PCB By downside cutting
It is recommended to cut the following PCB
  Suitable to cut PCB that can not be cut from the above side because with high componets.


1 Downside cutting router system
2 Cutting can be done without having to reverse PCB
3 Localized dust collection by special nozzle suction
4 Only very few dust attach on PCB. It is suitable for camera module cutting.



PCB(Max.) 220mm×200mm
PCB Thickness 0.4-1.6mm
PCB Material(Resin) FR4, CEM1, CEM1,3 etc.
Router Bit Dia. φ0.8, φ1.0, φ1.2, φ1.5, φ2.0mm
Cutting Speed(Max.) 50mm/sec
Repeatability ±0.01mm
Z Stroke(Max.) 50mm
Spindle Rotation 5,000 - 60,000rpm (Air Chuck System)
X,Y,Z Driving AC Servo
Power Power Voltage φ3 AC200V 50/60Hz
Power Consumption 3.0KVA
Air Air Pressure 0.5~0.6Mpa
Air Consumption 200L/min (A.N.R)
Unit Weight Approx.300kg
Unit Measurement W900×D950×H1,260mm

To page top